What Pine Is
Pine is not a single wood but a whole genus, Pinus, in the pine family Pinaceae. It is the largest genus of conifers, with roughly 120-135 species scattered across the Northern Hemisphere.1 On a plywood or packing-timber spec sheet, "pine" almost never names one species: the commonly traded woods are Scots pine (also sold as European redwood or red deal), the southern yellow pine group, radiata or Monterey pine, and the soft white pines such as eastern white pine.2 Foresters split the genus into two useful camps — the hard pines (subgenus Pinus, denser and more resinous, e.g. Scots and southern yellow pine) and the soft pines (subgenus Strobus, lighter and finer, e.g. white pine).1 The practical takeaway for a buyer: always confirm the species or origin, because density and strength swing widely from one pine to the next.
Where It Grows
Pine is native right across North America, Europe and Asia, with its richest natural diversity in Mexico, and it forms the backbone of the vast boreal forests, or taiga.5 Several species are now grown far outside their homelands on managed plantations: radiata pine is planted extensively across the Southern Hemisphere — New Zealand, Chile, Australia and South Africa — while Scots pine is grown throughout Europe and northern Asia and the southern yellow pines blanket the south-eastern United States.4 India does not grow these commercial pines at scale for the packing trade; it imports pine mainly as sawn timber and logs from Europe, New Zealand and North America.
Appearance and Grain
Pine sapwood is pale — creamy white to light yellow — and often runs in a wide band, while the heartwood shades from light yellow-brown to reddish-brown and darkens on exposure.3 The growth rings are usually well marked, with a clear contrast between the paler, softer earlywood and the denser, darker latewood; in the hard pines this gives a bold striped figure. Knots and resin (pitch) pockets are common and are a normal feature of the timber rather than a defect. The grain is generally straight with a medium-to-coarse, even texture, and freshly worked pine has the characteristic resinous scent most people recognise.
Weight, Density and Strength
Density is where pine species diverge most. Soft white pines sit around 350-450 kg/m³ (22-28 lb/ft³); Scots pine runs about 550 kg/m³ (34 lb/ft³); radiata pine about 515 kg/m³ (32 lb/ft³); and longleaf southern yellow pine reaches roughly 650 kg/m³ (41 lb/ft³) at 12% moisture content.26 Across the genus that spans about 350-660 kg/m³, with the hard, traded structural pines sitting in the ~440-660 kg/m³ band. Hardness follows density: soft pines register around 1,700 N Janka, Scots pine about 2,420 N (540 lbf), radiata about 3,150 N (710 lbf) and longleaf about 3,870 N (870 lbf).16 The resinous hard pines are strong for a softwood — comparable in bending strength to some hardwoods — which is exactly what makes pine a dependable framing and crating timber. For context, pine is markedly heavier, harder and stronger than okoume: Scots pine (~550 kg/m³, Janka ~2,420 N) against okoume (~430 kg/m³, Janka ~1,700-1,790 N).7
Working, Gluing and Finishing
Pine is generally easy to work with both hand and machine tools, though the resin can gum up blades and clog abrasives, and the hard latewood bands can cause tearout or an uneven surface when sanding.1 It glues and finishes well and holds nails and screws satisfactorily — the denser southern yellow pines grip fasteners noticeably better than the light soft pines. Importantly for our trade, pine peels cleanly for veneer and bonds reliably in plywood manufacture. Kiln-drying is standard: it fixes the resin and controls the fungal-stain risk that pine sapwood is prone to.
Durability and Treatment
Untreated pine is not durable. The pale sapwood is perishable and prone to blue-stain fungi and borer attack, and even the more resinous hard-pine heartwood is not classed as durable.1 Pine's redeeming quality is that the sapwood accepts preservative very readily, so pressure-treated pine — southern yellow pine in particular — is widely and reliably used for decking, fencing, poles and other outdoor structures. For any exterior or ground-contact application, specify properly dried and treated material rather than raw pine.
Sustainability and Legality
Conservation status is assessed per species, not for the genus. Scots pine is Least Concern and one of the most widespread conifers on earth;5 longleaf pine is listed Vulnerable by The Wood Database, reflecting a large historical decline in its native south-eastern US range, though the current IUCN Red List assessment for the species is Least Concern;6 and radiata pine is a special case — its small wild Californian population is of conservation concern, yet it is one of the most extensively planted timber trees in the world.4 Crucially, the pine that reaches the packing and plywood trade comes overwhelmingly from managed plantations and second-growth forests, not wild stands, and the leading species are not CITES-listed. To confirm responsibly sourced material, look for FSC or PEFC chain-of-custody certification.
How Cochin Wood Uses Pine
Pine is the workhorse softwood of pallets and crates worldwide, and that is precisely how we treat it. It is light, cheap and abundant, it takes fasteners well, and it is easy to heat-treat to the ISPM-15 export standard — the phytosanitary requirement for any solid-wood packaging that crosses a border. That combination makes pine a natural fit for export packing: low tare weight to protect your freight allowance, predictable strength for stacking and handling, and straightforward compliance for international shipments. At Cochin Wood we work pine alongside our plywood packing range for plywood pallets and plywood boxes & crates, matching the timber and panel grade to the weight of the goods and the destination. If you need okoume or another species instead, see the full range in our wood encyclopedia. Tell us your load and shipping route and we will specify the right build.